ANNA

• Inner panel made of pine/spruce 13 mm of thickness, white washed.
• Counter battens made of spruce 45×45 mm, c 600 mm.
  Mineral wool insulating material between battens, 45 mm of thickness.
• Vapor barrier membrane.
• Construction wood 195×45 mm, c 600 mm.
• Mineral wool insulating material between construction wood, 195 mm of thickness.
• Breathable membrane.
• Battens made of spruce for ventilation gap 30×45 mm, c 600 mm.
• Roof boarding made of spruce tongue and groove of variety G4-3 or better, thickness ≥ 17 mm at ≤ 1200 mm center distance between the rafters or laths. Width 95 or 120 mm.
• Underlay membrane YAM 2000.
• Icopal TopSafe Pro bitumen sheets.
• Ruukki steel gutter system set included.

• Gypsum board, 12,5 mm. Cover: wallpaper, two times covered with interior paints.
• OSB SE 3, 12 mm/ gypsum board, 12,5 mm.
• Counter battens 45×45 mm, c 600 mm.
• Mineral wool insulating material between battens, 45 mm of thickness.
• Vapor barrier membrane.
• Construction wood 45×145 mm, c 600 mm.
• Mineral wool insulating material between construction wood, 145 mm of thickness.
• Windshield.
• Vertical spruce battens for ventilation gap 30×45 mm, c 600 mm.
• Horizontal panel made of spruce, painted, matt, rough surface.

• The foundation and earthworks are not included. Special needs of earthworks, including pile driving, blasting or similar are not included. Foundation, plumbing & electricity hidden works have to be ready before house set delivery.

• Construction wood 45×95 mm cc 400 mm.
• Mineral wool insulating material between construction wood, 145 mm of thickness.
• Interior wall covering 12.5 mm plasterboard in ergonomic design on either side.
• In bathrooms, plasterboard is replaced with an approved wet room board and with an underlying construction plywood.

• Wood: finger jointed pine wood: pine of very high class B, without wood plug repairs (SIS 818104) – impregnated. All components feature a glued-slat construction. Surface treatment according to SIS 056812 for wooden windows.
• Profile: Danish window, classic profile.
• Coating: impregnation, priming, painting, varnishing.
• Exterior finishing: painted, matt, interior finishing painted, matt.
• Glazing: the sections are glazed with 3-layer insulating glass: uni glass.
• UG=0.7 W/m2K Super Thermo +++ (T4-12A.TPS-F4-12A.TPS-T4).
• Locking: IPA BESLAG.
• Sealing: cut sealings, resistant to low temperatures and mechanical stresses.

• Wood: finger jointed pine wood: pine of very high class B, without wood plug repairs.
• (SIS 818104) – impregnated. All components feature a glued-slat construction.
• Surface treatment according to SIS 056812 for wooden windows.
• Profile: Danish window, classic profile.
• Coating: impregnation, priming, painting, varnishing.
• Exterior finishing: painted, matt, interior finishing painted, matt.
• Glazing: the sections are glazed with 3-layer insulating glass: uni glass.
• UG=0.7 W/m2K Super Thermo +++ (T4-12A.TPS-F4-12A.TPS-T4).
• Locking: IPA BESLAG.
• Sealing: cut sealings, resistant to low temperatures and mechanical stresses.

• Wood: finger jointed pine wood: pine of very high class B, without wood plug repairs. (SIS 818104) – impregnated. All components feature a glued-slat construction. Thresholds are made of finger-jointed Oak hardwood. Sills for top lights and lift/slide windows are made of pine. The slide rail in the door leaf is made of Oak hardwood.
  All products can also be specially ordered in solid mahogany, oak or teak.
• Surface treatment according to SIS 056812 for wooden windows.
• Profile: Danish door, classic profile.
• Coating: impregnation, priming, painting, varnishing.
• Exterior finishing: painted, matt, interior finishing painted, matt.
• Glazing: the sections are glazed with 3-layer insulating glass: uni glass.
• UG=1.1 W/m2K laminated, tempered (4tempered-12A.TPS-4-10A.TPS-33.1T).
• Locking: IPA BESLAG, 3 point locking FIX 2150, ASSA 701/256 + A635 (set).
• Sealing: cut sealings, resistant to low temperatures and mechanical stresses.

• Wood: finger jointed pine wood: pine of very high class B, without wood plug repairs (SIS 818104) – impregnated. All components feature a glued-slat construction. Thresholds are made of finger-jointed Oak hardwood. Sills for top lights and lift/slide windows are made of pine. The slide rail in the door leaf is made of Oak hardwood. All products can also be specially ordered in solid mahogany, oak or teak.
• Surface treatment according to SIS 056812 for wooden windows
• Profile: Danish lift-sliding door D68, classic profile
• Coating: impregnation, priming, painting, varnishing
• Exterior finishing: painted, matt, interior finishing painted, matt
• Glazing: the sections are glazed with 3-layer insulating glass: uni glass UG=1.1 W/m2K laminated, tempered (4tempered-12A.TPS-4-10A.TPS-33.1T)
• Locking: GU 934/954
• Sealing: cut sealings, resistant to low temperatures and mechanical stresses

• Wood: dimensions: 2089×786 mm.
• Core and frame: wood and MDF combination, thickness 40 mm.
• Finishing: white painted, matt.
• Threshold: not included.
• Hardware:
• ASSA hinges (matt chrome color)
• ASSA set (matt chrome color)
• ASSA 565 – lock frame (matt chrome color)
• ASSA 2864-2 frame plate (matt chrome color)
• ASSA 256 GDS16-21 accessory (matt chrome color)
• ASSA 640 handle (matt chrome color)
• lock block: height 360 mm, width 65 mm ASSA 640 handle (matt chrome color), fitted centrally, to one side only – indicated by the word ‘LOCK’ on the top ledge.

• Exterior casings made of spruce, painted, matt.
• Interior casings made of spruce, painted, matt.
• Windows & entrance doors boxes, both: interior, painted, matt and exterior, painted, matt.
• Interior sills for the windows made of spruce, painted, matt.
• Exterior sills for windows (steel sheets).
• Outer film/tape & inner film/tape.
• Massive pine/spruce stairs with the railings. (wooden), painted, matt.
• Ceiling, floor skirtings, painted, matt.
• Floor tiles acc. drawings (economical option).
• Flooring: laminate 32 strength class (economical option).
• Exterior paints.
• Interior paints.

• The delivery includes standard IKEA kitchen option, the layout is exposed above. Kitchen cabinet’s IKEA design available options: Bodbyn, Ringhult, Voxtorp, Veddinge, Hittarp. (without connection to tubes/pipes and appliances). This is what the standard option includes:
  Cabinets, rails, drawer/door fronts, wall panels, cabinet interior, hinges, cover panels, plinths, legs, drawers, doors, knobs/handles, worktop, sinks and taps. Hoods, Hobs, Ovens, Fridge and freezers, Dishwashers Cabinet- and vitrine lighting.
• SMAKSAK forced air oven. Article no: 904.117.28.
• INSJÖN kitchen mixer tap w pull-out spout. Article no: 203.418.71.
• HAVSEN inset sink, 1 bowl 53x47x20 cm white Article no: 392.537.13.
• VÄLBILDAD induction hob, 29 cm. Article no: 204.675.92.
• UTDRAG built-in extractor hood 60×21.5 cm stainless steel. Article no: 103.891.42.
• SMÅFRUSEN under counter fridge. Article no: 104.947.70.
• Glazed ceramic tiles 10x30cm white matt.

• No appliances and furniture included in house delivery. Optionally we can offer interior design solutions, drawings, renders, videos, materials designed and selected.

• Standard option is included (without connection to tubes/pipes and appliances). This is what the standard option includes:
• Glazed ceramic tiles 10x30cm white matt/light grey matt/grey matt
• Toilet GUSTAVSBERG Nordic 3
• BROGRUND hand shower kit with diverter. Article no: 903.425.46
• BRAVIKEN basin 61 x 49 cm. Article no: 301.955.48
• Sink cabinet GODMORGON with 2 drawers, white. Article no: 402.811.02
• Bath faucet with strainer, chrome plated DALSKÄR. Article no: 302.812.92
• GODMORGON Mirror cabinet with 1 door Article no: 102.302.27
• ELECTROLUX Perfect care 600 depth 38 cm EW6S306S A+++
• BROGRUND Wall shelf with towel rail, stainless steel. Article no: 703.339.82
• BROGRUND Toilet roll holder, stainless steel. Article no: 003.285.40
• BROGRUND Toilet brush, stainless steel. Article no: 403.285.38
• BROGRUND Towel hook 2 pcs, stainless steel. Article no: 603.285.42

• No heat source is included in the delivery.

• Installation of the corrugation for electrical wiring inside the walls (without connection to electricity box and appliances) is provided with the offer.

• Not included in the delivery. However, installation (without connections to appliances) of the tubes/pipes inside the walls can be provided with the offer as extra, materials needed are not included in standard version of the building specification.

• Not included in the delivery. However, installation (without connections to appliances) of the tubes/pipes inside the walls can be provided with the offer as extra, materials needed are not included in standard version of
  the building specification.

If you want to receive a delivery description with prices, please fill the CONTACT US form or send us an email.